FANATEC Porsche 911 Turbo S Wheel, Manual

Page: 29 / 33

29
7. Summary: Modes and button combinations
Choose platform mode
Power on the wheel and wait until self calibration has
fi nished. Display shows “- - - “.
Xbox 360: Press and hold Xbox 360 Guide Button
for one second.
PC: Press and hold Back Button for one second.
PS3: Start PC mode. Press Back Button and
Connect button simultaneously.
Calibrate wheel center
Start PC mode and then press and hold RSB and LSB
simultaneously (see side 27). Then Press Xbox 360 Guide
Button and release the buttons.
Reset all Tuning Menu setting
Press and hold Tuning Button for ten seconds.
Start 7GS Shifter Calibration
Press Start Button and Tuning Button simultaneously.
8. Cleaning the racing wheel
Clean only with a dry or slightly damp cloth. Using
cleaning solutions may damage your racing wheel.
9. Troubleshooting
The Porsche 911 Turbo S Wheel must not be opened
or modifi ed. Endor® AG expressly prohibits analysis
and utilisation of the electronics, hardware, software and
fi rmware contained in the controller.
In case diffi culties occur in connection with utilisation of
the Porsche 911 Turbo S Wheel, please use the following
guide for elimination of errors.
On the website
www.FANATEC.com/support you will fi nd
further details and contact data.
Malfunctions on Playstation 3
`
Game does not recognize the Porsche wheel:
Please switch the wheel to compatibility mode.
`
Wheel switches to PC mode after starting a game:
Please enter PS3 mode again.
`
Saving the game is not possible:
Please use the SIXAXIS controller to save the game
and navigate in the system menu.
Malfunctions on Xbox 360
Forza Motorsport 3 does not detect the 900° wheel
rotation: Make sure you start the Xbox 360 with the on/off
button on the console and not by pressing the Xbox 360
Guide Button on the wheel. Make sure you select 900 for