FANATEC Porsche 911 Turbo S Wheel, Manual

Page: 23 / 33

23
PC Mode
1. Installation of drivers
For PC use, you need to install the driver before you
plug in the RF dongle or the USB cable.
The driver requires less than 10 MB of space on
your hard disk and is compatible to Windows XP
(SP2) and Windows Vista (32-Bit/64-Bit) as well as
Windows 7 (32-Bit/64-Bit).
Please check www.FANATEC.com/support for the
latest updates on the driver.
2. Connect the USB cable to a free USB slot of your
PC and to the connector on the left side of the
wheel. Alternatively you can plug in the (optional)
RF dongle to your PC. In case the wheel does not
connect to the RF dongle you might need to bind
it. Please see section 6.4 of this manual for further
information.
3. Power on the wheel.
4. After self calibration press the Back Button and hold
it for one second. There will be no wheel button
illumination.
5. PC and PWTS are connected.
Driver
To open the driver dialog you have to go to the control
panel, double click „Game Controllers“ and choose the
properties of „Porsche Wheel“.
In this window you can change several settings of the
wheel and test if all buttons are working fi ne.
PS3 Mode
1. Connect the USB cable to a free USB slot of your
Playstation and to the connector on the left side of
the wheel. Alternatively you can plug in the (optional)
RF dongle to your PlayStation 3. In case the wheel
does not connect to the RF dongle you might need
to bind it. Please see section 6.4 of this manual for
further information. Power on the wheel and your
PlayStation 3.
2. After the self calibration enter the PC mode by
pressing Back Button for one second. There will be
no wheel button illumination.
3. Press Connect Back Button simultaneously.
Wheel button illumination shows PlayStation
symbols
4. Playstation 3 and PWTS are connected.
IMPORTANT: Please note that on some Playstation 3
games it is required to use the SIXAXIS controller for
Navigation in the games menu.
After starting a game, the wheel could return to PC
mode – press the button combination
Connect-Button +
Back-Button again to re-enter PS3 mode ( see side 24 ).