a second when pressed, but also when the button is not pressed.
In order to achieve this, repeat the above programming steps
once. The WIRELESS Controller will then perform the buttons’
commands constantly until deactivated.
Please refer to the graphics below for a summary of the above.
Available Controls: [ , , , , L1, L2, L3, R1, R2, R3, up, down, left, right]
Note: When the WIRELESS Controller is set to Turbo Hold it will
enter Sleep Mode after an idle time of three minutes.
Vibration ON/OFF: When starting your PlayStation
®
2 console
the red LED of the WIRELESS Controller’s receiver will be lit up
while the green one flashes slowly, indicating that there currently
is no connection. Press the Vibration ON/OFF Button once for
less than one second to activate the controller. Within a few
seconds the green LED will stop flashing and light up constantly,
indicating a synchronised connection between console/receiver
and WIRELESS Controller. Your WIRELESS Controller is now ready
7
Ordinary Action
Turbo Function
Turbo Hold Function
“Turbo” Control
“Turbo” Control
“Turbo” Control
