4
(Fig. 3)
4) Unscrew the knob on the search coil and remove the knob connector. See
Figure 4. Insert the stem and align the holes on the search coil bracket and
the stem. Push the connector through the holes and tighten the knob. See
Figure 5.
(Fig. 4)
(Fig. 5)
5) Attach the control head to the stem. Position the control head so that the slot
on its underside is aligned with the black tab on the stem. See Fig. 6. Place
the slot over the stem and push the control head forward. Now tighten the thin
bolt that passes through the stem and holds the control head firmly in place.
See Fig. 7.
(Fig. 6) (Fig. 7)
6) Loosely wind the search coil cable around the stem. Leave some slack in the
cable.
7)
Insert the cable plug into the jack on the detector’s control head. CAUTION:
The plug fits into the jack correctly in only one way. Do not force the
connection or you may damage the plug.
