9
1. Insert the charger cable carefully. Check that the plug and socket are
aligned.
2. The indicator light will turn red to indicate that the device is charging and
will turn green when the full charge level is reached.
3. The battery will reach a full charge in 5-6 hours.
The device can also be charged by connecting it to a computer using the
type C cable supplied.
Connecting the charger improperly may cause serious damage to the device.
Any damage caused by misuse is not covered by the warranty.
Note: The device will power off automatically when the battery reaches 2%.
8.7 How to change the battery
1. Unclip the back-left corner where the little nook is and from this angle,
remove the back cover.
2. Use the small nook on the bottom to remove the battery.
3. Insert the new battery with the pins located against the gold springs (with
the label up).
4. Press the battery down into the case.
5.
To replace the back cover, reverse step 1 and push gently to close.
