16
Product Name
AQ3 Wet & Dry Vacuum Cleaner
Main Unit Dimension
260 x 260 x 1090mm
Main Unit Weight
~3.8Kgs
Base Station Dimension
309 x 283 x 232mm
Base Station Weight
~1.2Kgs
Charging Time
3.5 +/- 0.5 hours
Model no.
32-203-XX (XX stands for different version)
Power Supply unit Input
100-240V ~, 50/60Hz, 0.8A
Power Supply unit Output
26.5V, 1.2A, 31.8W
Dirty Water Tank Capacity
600ml
Clean Water Tank Capacity
650ml
Battery Capacity
2,400mAh
SPECIFICATIONS
17
Problems
Possible cause
Solutions
The Appliance is not
working
Running out of battery
Charging after use and ensure that the
appliance is full charged before use
Overheat protection of battery
circuit.
Wait for the battery temperature to return
to normal and try again.
The sewage in the dirty water tank
exceeds the “Water Level” line.
Clean the dirty water tank and scrub the dirt
level sensor at the upper cover of the dirty
water tank. Install the tank back on and try
again.
Dirty water tank or roller brush not
in place.
Install the dirty water tank and roller brush
properly.
Clean water tank is out of water.
Fill water into clean water tank.
Clogged roller brush or dirty water
tank pipes.
Clean the roller brush and pipe.
Roller brush stuck.
Clean the roller brush.
Unable to charge
The base station not powered.
Check the contact of electric socket and
power supply unit.
Bad contact of battery charging
pins.
Clean the surface of contact pin.
Damaged power cord.
Contact manufacturer for warranty service.
The main unit was not installed in
place at the base station.
Make sure the main unit is in place by press
it lightly.
Unable to start self-
clean process
Dirty water tank full.
Pour sewage out of dirty water tank and
install back properly.
Dirty water tank not installed.
Ensure the dirty water tank is installed in
place.
Low or depleted battery.
charging and ensure the minimum battery
level is achieved.
Clean water tank is out of water.
Fill water (not exceed the “water Level”
line) into clean water tank and installed
back properly. Short press “
” to continue
the self clean process.
Abnormal sound
from running motor
The roller brush is stuck, or the
sewage flows back into the motor.
Correctly install the roller brush and clean
the roller brush. Operating the appliance
correctly to prevent sewage from flowing
back into the main unit.
Suction power
decrease
The dirty water tank suction pipe
is clogged, or the filter is dirty.
Clean the dirty water pipes, dirty water
tank and the filter.
FAQ AND TROUBLE SHOOTING
