Parts Descriptions
7
8
Parts Descriptions
Parts Descriptions
Headrest
Massage roller/vibration
(in the backrest)
Seat
Footrest
Air cells for thighs (1)
Back pad
Armrest (left)
Footrest adjusting lever
Seat vibrator
Air cells for hip (3)
Air cells for legs (6)
Backrest
Armrest (right)
Remote control stand
Remote control
Caster
Metal fittings for folding backrest
Power cord
Power switch
Displays the operation being
performed. See the figure to
the right.
Adjust the reclining angle.
Well-Being
programs buttons
Power switch
Main body
Remote control
You can turn the power on
and off using the remote
control. If this switch is
pushed during operation, the
massage rollers will return
to the starting position
automatically.
Liquid crystal
display (small)
Displays the selected
program, current massaging
point, and time remaining.
See the figure to the right.
Five shoulder kneading
cycles at the position
detected by the optical
sensor during auto search.
If necessary, fine adjust the
position using the UP
and DOWN buttons.
(For automatic programs only)
Five programs are available.
1. Full body relief
2. Stiff shoulders
3. Lower back tension
4. Legs & hips fatigue
5. Acupressure
Three programs are
available
1. Morning
2. Nighttime
3. Seat
Liquid crystal
display (large)
Shoulder position
fine-adjustment
Power reclining
Healthcare Programs
See the internal buttons
layout shown to the right.
External panel
Cancels the back vibrating
operation in the automatic
operation mode.
Cancel 'Back Vibration'
Footrest buttons
You can adjust the angle of
the footrest using the UP
and DOWN buttons.
Acupressure point
(indicator)
Power reclining
Footrest buttons
Manual Selection
Mode
During an automatic
program, pressing the
Back vibration
cancellation button
will light the lamp and
pressing the button
again will turn off the
lamp.
Adjusts the speed of
Kneading, Tapping (1)
and Kneading &
Tapping operations.
Liquid crystal display (small)
●
Liquid crystal display (large)
●
Internal buttons layout
●
●
Displays the current
operation using text
or graphics.
●
For details of the
display, see page 17
and 18.
Kneading, Human Hands,
D o u b l e - k n e a d i n g ,
Kneading & Tapping,
Rhythm Acupressure (1
and 2), Tapping (1 and 2)
and Rolling (Partial and
Whole massage)
Width adjustment
buttons
Adjusts the width
between the right and
left massage points for
rhythm acupressure (1),
tapping (1 and 2), rolling
(Partial and Whole massage)
and back vibration.
Acupressure Point
(back)
Acupressure Point
(seat)
Acupressure Point
(legs)
Back vibration
cancellation
Up/down---Use these
buttons to adjust the vertical
position of the rollers.
Roller vertical
position
Displays the time
remaining for the
current program.
Timer
Two options:
Back or Seat vibration.
Back/seat vibration
Speed adjustment
Low-medium-high buttons:
Use these buttons to
adjust the intensity of
the air massage, legs
or seat separately or
legs and seat together.
Select one of these
buttons to massage
your lower body only.
Lower body button
Program indicator
Warning
Prohibited
Do not allow the remote control to get wet, and do not perform any
operation with wet hands, in order to prevent electric shock or fire.
●
To prevent damage and malfunction, do not sit on the remote control. Do not step on or place
any heavy objects on the remote control. Do not pull on the wire of the remote control.
●
To prevent damage to the remote control, do not use sharp or hard objects to press the
buttons on the control.
Caution:
The points being
massaged are lit
or blink.
