8
Err3
Noise Error
This error is normally from electrical noise
interference. This error can be caused by
computers, televisions, fluorescent lights, cell
phones, cordless phones or other electrical items.
The detector needs to be moved to a different
location away from the item causing the interference.
To clear this message (Err3) from the detector,
unplug detector for five minutes, power back up
and reset/clear memory to start new test.
Err4 Sensor
Error
This error occurs if the sensor fails the self-test. If
this error code appears, the detector should be
unplugged for five minutes and powered back up.
If the Err4 reappears, please call our customer
service department at 800-748-0298 or 616-530-6540.
WARNING: Risk of Electrical Shock! Do not
remove the back cover. Sensor requires 250VDC
and may cause severe electrical shock. Removal of
the back cover will void your warranty.
Please Note:
To offer protection to your furniture, we have included 4
Please Note:
Noise error can also be caused by power surges from power
outages or brown-outs. Using a surge protector can minimize this
noise error.
Do not
use a battery backup device in conjunction
with the detector.
non-slip rubber pads to be applied to the back of the detector
at each corner.
Error Messages
Every 24 hours, the detector will do a self-test. If there is a
failure in this self-test an error message will appear in the
display window.
