How to carry in and relocate product
When relocating the product, turn off the main power switch, disconnect the power plug from the receptacle, and also
disconnect the connector of the power cable from the inlet.
●
The passage requires a width of about 70 cm (27.5 inch )or greater.
●
As the product is heavy, wear gloves for carrying so as not to drop the product or get injured.
●
As the product is heavy, pay attention not to cause lower back pain during carrying in and transfer.
●
Dropping this product may damage the floor or injure you. Therefore, securely hold the product.
●
Do not carry the product with a person sitting on it.
●
Before transferring the product, disconnect the power cable from the receptacle, and disconnect the power
cable connector from the inlet.
→
Failure to follow this instruction may damage the power cable , possibly causing fire or electric shock.
3
Relocating the product after its installation
To carry the product, one person should hold the hook at the rear side of the back rest, and the other person should hold
the lower front part of the main machine.
Carry the product using two people
CAUTION
The weight of the main machine is about 77 kg(170 lbs.). Therefore, move it very carefully.
Two people should hold the back rest and the lower front part of the main machine.
The total weight of the right and left arm rests is about 17 kg (34.5 lbs.).
The weight of the foot rest is about 23 kg(50.7 lbs.).
