Installation steps
Installation location
Install this product by following the steps below.
In order to prevent the product from making contact with a wall or other object, secure a clearance of 65 cm (25.6 inch) or
more behind the product and a clearance of 30 cm (11.8 inch)or more in front of the product.
1. Check the installation location and carry in the product.
2. Mount the arm rests.
3.
Attach the tablet.
4. Attach the power cable.
5.
Mount the foot rest.
●
This product is heavy. Therefore, wear working gloves to prevent injury.
●
Installation of this product must be carried out by two or more persons.
●
When a product has been carried into a room from the cold outdoors, wait until the product has warmed up to room temperature (for one
hour or longer) before staring the installation work.
●
To prevent the floor surface from being damaged and to reduce the sound made during work, place a mat or the like beneath the product.
(Do not place a hot carpet.)
●
This product is heavy. Therefore, pay attention not to damage the floor surface when putting down the product.
●
Keep this product at least one meter away from AV devices such as a TV set or radio. Failure to follow this instruction may cause noise to interfere with
the product.
●
When a person weighing 100 kg (220 lbs.)sits on the product, a load of about 1.9 kg/
㎠
is applied to the floor surface.
●
Do not use this product in a humid location such as bath room or sauna.
●
Install and use the product on a level floor surface.
●
+VUV[\ZL[OLWYVK\J[PUHK\Z[`SVJH[PVUVYHSVJH[PVU^P[OHOPNOHTIPLU[[LTWLYH[\YL*ǣVY
higher).
●
Do not install the product in a location subject to direct heat radiation, such as direct sunlight or a stove, that
may heat the product to a high temperature.
2
Checking installation location of the product
CAUTION
Approx. 222 cm
(87.4 inch)
Approx. 135 cm
(53.1 inch)
Approx. 108 cm
(42.5inch)
Approx.
30 cm
(11.8 inch)
Approx.
37 cm
(14.5 inch)
Approx. 65 cm
(25.6 inch)
