Fametech Zircon Series, User Manual

Page: 123 / 142

g.
Press the open buttons of “Cash Drawer Test” to perform the test.
Note:
The program is for testing only.
If editing AP Open drawer is required, please refer to the following command set.
Cash Drawer Controller Register
Register Location: I/O port 282h
Attribute: Read/Write
Size: 8 bit
Bit 0~3, 5~7: Reserved
Bit 4: Cash Drawer “DIO OUTPUT”, pin output control.
= 1: Open the Cash Drawer
= 0: Close the Cash Drawer
Control Command Example
Run “Debug.EXE” under DOS or Windows98
Command Description
O 282 01 Open cash drawer
O 282 00 Allow to close cash drawer
Set the I/O address 282 bit 4 = 1 to open the cash drawer by “DIO OUTPUT” pin control.
Set the I/O address 282 bit 4 = 0 to close the cash drawer.