-12-
Operating Your Scanner
Perform Scan
To perform the scan, point the scanner to the barcode and press the
scan trigger; the visible red light for easy alignment will guide you to scan
the barcode.
Point the scanner with the RED-Light alignment projected
horizontally to the barcode.
Adjust the distance to capture the barcode,
and the beep sound will notice you that the data is
properly scanned.
Note:
Please properly adjust the distance between the barcode scanner and
the barcode in order to acquire the barcode data.
(please refer to appendix
“
Scan Zone
” for further information)
Keep the scanner and the receiver in an open space.
The transmission range may vary due to local conditions.
Scanner
Red-Light alignment
Scan Distance
ScanZone
Scan Trigger
5 sec
Scan Trigger