ENGLISH
Set up:
All connections of the device should be made before switching on. Only use high-quality and
undamaged cables that are as short as possible for the connections.
1.
Switch the receiver on using the on/off switch
(1)
.
2.
Turn on the bodypack using the on/off switch
(14)
.
3.
Connect the bodypack to your receiver.
Use the channel selection
(8)
to select a channel that you want to control.
Press the scan button
(7)
on the receiver to search for free frequencies. As soon
as the scan is finished the display will show "Scan ok".
To connect the bodypack to the receiver, press the IR synchronization button
(6)
of the receiver and align the IR interfaces of the bodypack
(15)
and the receiver
(4)
directly. After successful synchronization, the display of the bodypack
(16)
flashes and the display of the receiver
(2)
shows "sync ok".
4.
Connect your receiver to your mixing console. You have two choices:
Connect your receiver via the 6.3mm jack mix output
(10)
to get a sum
signal of all channels.
Connect your receiver via the XLR outputs
(12)
(Balanced) to control each
channel of the radio link individually.
5.
Set your desired output volume using the respective channel volume control
(5)
of the
receiver.
