FALMEC Milano Genova 120, Installation Manual

Page: 15 / 24

241 268
375
Airflow
380
133 / 154
Ø 403 / 445
597.5 / 599
Ø 194
1. Fan power supply connects to
internal hood unit
2. Tile or metal roof flashing
(optional accessory)
3. Rigid duct mount (optional accessory)
4. 200mm flexi ducting (attached to
internal hood unit)*
*Advise to include gentle bend in duct run as well
ensuring ducting is pulled tight and excess removed.
We recommend to install the roof motor
offset from rangehood to avoid direct
noise travel.
1. Fan power supply (connects to
internal hood unit)
2. 200mm flexi ducting (attached to
internal hood unit)*
*Advise to include gentle bend in duct run as well
ensuring ducting is pulled tight and excess removed.
1. Fan power supply (attached to
internal hood unit)
2. 200mm flexi duct installed between
rangehood and motor inlet*
3. 200mm flexi duct installed between
motor outlet and wall/eave vent
4. Vent installed in eave position
1. Fan power supply (attached to
internal hood unit)
2. 200mm flexi duct installed between
rangehood and motor inlet*
3. 200mm flexi duct installed between
motor outlet and wall/eave vent
4. Vent installed in wall position
*Advise to include gentle bend in duct run as well
ensuring ducting is pulled tight and excess removed.
1
2
3 4
1
2
3
4
1
2
1
2
3
419/518
21
123/147
210/260
197
Duct OD
75
75°
3 Pin Plug and Lead
Approx 1.8m extending
from case
4
EW-765/1140 Dimensions
EW-2010 Dimensions
All measurements in mm
ER-765/1140 Dimensions
ER-2010 Dimensions
REMOTE MOTOR SOLUTIONS
EXTERNAL ROOF SOLUTION
765, 1140 & 2010m3/h
EXTERNAL WALL SOLUTION
765, 1140 & 2010m3/h
IN-ROOF MOTOR SOLUTION
765 & 1140m3/h