FALMEC DIAMANTE, Instruction Booklet

Page: 18 / 64

16
push button control panel turns on press any button on the radio control within 10 seconds.
This operation records a new transmission code.
FILTERS
REMOVING AND REPLACING’S INSTRUCTIONS
H
1. METAL FILTERS
To reach the metal filters one must remove the three frontal panels (see fig A1 and A2).
To remove the metal filters use the handle.
2. CHARCOAL FILTERS
To replace the charcoal filters, proceed as follows: remove the metal filters as described
above. The two filters located at the ends of the motor can now be easily accessed.
To install the new fi lters see picture.
In case of hood with the motor box the fi lter is located on the botton part of the motor box.
To install the new fi lters see picture.
To order new charcoal fi lters contact the distributor/retailer.
VALID ONLY FOR ITALY: download the appropriate order form from: www.falmec.com (access
the assistance drop-down menu).
LIGHTING
ASSEMBLY AND REPLACEMENT
I
1. FLUORESCENT TUBE (DIAMANTE)
Fluorescent tube replacement:
a) Disconnect the appliance from the mains.
b) Remove the steel panel and the metal filters (see H 1). Undo the 2+2 knurled fixing studs
in the steel support.
c) Remove the neon tube by rotating it by 90° and replace it with an identical one (13W tube T5).
d) Repeat point B in reverse.
e) Reconnect the appliance to the mains
2. LED SPOTLIGHT (GLEAM)
In this case the hood is equipped with high efficiency, low power LED spotlights with ex-
tremely high durability under normal use conditions.
MAINTENANCE AND CLEANING
L
Constant maintenance ensures the correct operation and efficiency of the appliance over
time. Special attention should be paid to the metal grease-trapping filters and the charcoal
filters. Frequent cleaning of the filters and their supports will ensure that fats and grease do
not accumulate on the range hood, with the consequent risk of fire.
1. METAL GREASE-TRAPPING FILTERS