Inspection Log
FallTech EcoAnchor
Model #:_______________
Serial #:_______________
Mfg. Date:_____________
Inspection
Date
Inspector
Comments
Pass/Fail Corrective
Action to
be Taken
Approved
By
Section 9: Maintenance and Storage
The service life of your
FallTech EcoAnchor
will depend on two factors: The
environmental conditions of your working environment along with proper care
(specifically, maintenance and storage).
Keeping the
EcoAnchor
clean and free of contaminants will greatly increase the
service life and will ensure that the
EcoAnchor
will be in proper working order in the
event that you need it to arrest a fall. The following steps should be taken periodically:
1. Using a damp rag and a mild soap and water solution, wipe down the surface
EcoAnchor
to remove soil and surface contaminants. Ensure that the labels are
legible at all times.
2. Use a damp rag to clean the surfaces of any connecting hardware.
3. If there is an excessive build up of paint, oil, dirt tar or other contaminants that cannot
be removed, remove the
EcoAnchor
from service and have it replaced.
4. Do not attempt to use any lubricants or solvents on any part of the
EcoAnchor
. Store
in a cool, dry location away from direct sunlight and where it will not be exposed to
chemical vapors.
5. This
EcoAnchor
should be allowed to air dry after use and should then be rolled up
and kept in the storage bag.
6. Do not throw the
EcoAnchor
into a pile or a locker or storage box, as this may cause
damage.
Provided your
EcoAnchor
passes inspection, has been properly maintained, has not
been involved in arresting a fall and is in serviceable condition, it will be suitable for use.
If your
EcoAnchor
is in need of repair or you are concerned about its condition, return it
to the place of purchase to arrange an inspection and/or repair through an authorized
service center. For further details, contact
FallTech
.
Section 10: Specifications
This section contains important information regarding the performance and
construction of this product. Pease read and be familiar with this and all information
contained in this instruction manual.
10.1: Mandatory Disclosures
This instruction manual addresses foreseeable hazards, uses and applications. If
you have questions about your application that are not addressed in this document,
contact FallTech for additional guidance.