41
Journeyman Full Body Harnesses and Combinations – Rated 425 lbs.
7020 7023
7029 7034QCS
7035QCL
7020XL 7023XS
7029XL 7034QCM
BV7034MP
70202X 7023XL
70292X 7034QCL
BV7034LP
7021 70232X
70293X
7034QC2X3X
BV7034XLP
7021XS 70233X
7029MB 7035XS BV7034XXP
7021XL 70234X
7029MBXL
7035S BV70343XP
7021XLSP 7023QC
7029QC
7035M
GT70212X
70212XL 7024 7029QCXL2X
7035L
GT70213X
70212X246Y 7025
7033
7035XL
7042
70212X46Y3 7025XL 7034S
7035XXL
7042S
70213X 70252X
7034M 70353XL
7042M
70214X 7027
7034L 70354XL
7042L
7021QC 70272X
7034XL 7035MQC
70422XL
7021QCXL 70273X
7034XX
7035XLQC
7021QC2X3X 7027QC 70343X
7035QCS
Specialty Full Body Harnesses – Rated 425 lbs.
7037
7039XL 7041XL 7047XL OI70373QC
7037XL 70392X 70412X 7048S
70372X 7040
7047S 7048M
70373QC 7041
7047M
7048L
7039 7041XS
7047L
7048XL
ComforTech Full Body Harnsses – Rated 425 lbs.
7080SM 7081SMRD
7082QSM 70832X 7085XL
7080LX 7081LXFD
7082QLX 7083QSM
BM7080SM
70802X 7081LXRD
7082Q2X 7083QLX
BM7080LX
70803X 7081LXFDRD
7082QSMFD
7083Q2X
BM70802X
7080LXFD 70812XFD 7082QLXFD 7083Q3X BM7080SMRD
7081SM 70812XRD
7082Q2XFD
7084S BM7080LXRD
7081LX 7082SM 7082LXQSFD
7084M BM7080RDLX
7081XS 7082LX 70822XQSFD
7084L SH7041LX
70812X 70822X 70823XQSFD
7084XL
70813X 70823X 7082SMQSFD
7085S
70814X 7082SMRD
7083SM 7085M
7081SMFD 7082LXFD 7083LX
7085L
FlowTech Full Body Harnesses – Rated 425 lbs.
7086S 7087L 7088S 7089L
7091SFD
7086M 7087XL 7088M 7089XL
7091MFD
7086L 7087SFD
7088L 7089SFD
7091LFD
7086XL 7087MFD
7088XL 7089MFD
7091XLFD
7087S 7087LFD
7089S 7089LFD
7087M 7087XLFD
7089M 7089XLFD
42
High-Vis Vests with Full Body Harnesses
7018SMO 7015SMO 7015LXL 7018LXL
7018LXO 70152X3XO
70152X3XL
70182X3XL
70182X3XO 7015SML
7018SML
Titanium™ Full Body Harnesses
7006T 7008T 7010T 7078SMT
7078SMST
7006ST 7008ST 7010ST 7078LXT
7078LXST
ARC Flash Full Body Harnesses
7047 70472X
7049XL
7051S
7047S 7049 70492X
7051XL
7047XL 7049S 7051
70512X
Appenix A: Tower Climbing Harnesses
With the rapid expansion of communications technology and wind
energy, climbing and prolonged work positioning at extreme heights is
becoming more common.
FallTech
has introduced a series of Tower
Harnesses under the
ComforTech
line to address this need.
Harnesses for these specialized applications typically require
additional knowledge and training. Before using this product, be sure
you have read and understand the contents of this entire instruction
manual and that you have undergone training for the use of this product
in accordance with ANSI Z359.2-2007 and Section 6 of this instruction
manual. Lack of training in the use of this product and subsequent
misuse may lead to serious injury or death.
FallTech 7084 series and 7085 series Tower Harnesses are equipped
with a seat sling for prolonged work positioning. Before using, check for
proper installation of the seat sling:
1. On the back of the seat sling are two narrow web straps which
fasten to the waist pad by means of 1” pass-thru buckles.
Ensure these are fastened and adjusted to your preference.
These straps are not load-bearing: They are to position the seat
sling relative to your backside so that it is in the correct position
prior to engagement.
2. Adjacent to each D-ring, you will find a black 1-3/4” web strap
with a male pass-thru buckle. This buckle is attached to the
steel buckle on either side of the waist pad, located behind the
side or hip D-rings. Ensure this buckle and strap assembly is
inserted in the manner shown in Figure A below.
