Faller 163701, Instruction Manual

Page: 132 / 150

132
Programming a digital vehicle
EN
Creating a digital vehicle in the "Car System Digital" software
The properties of a converted vehicle vary depending on the motor installed,
the transmission used or the drive wheels mounted. Since that is relevant
e.g. for its speed, you will define the values for your specific vehicle type.
Create the converted vehicle in the "Car System Digital" software.
X
In the menu bar under "Tools" click on "Edit Vehicle types".
View window "Edit Vehicle types" is displayed.
Fig. 49: View window "Edit Vehicle types"
X
From the column "Vehicle types" copy one of the existing vehicles
that looks like the vehicle you have converted.
X
Click on the chosen vehicle that is intended to serve as a copy.
The chosen vehicle is displayed with a blue background.
X
Click on the button "Copy" below the column.
A duplicate of the vehicle copied is displayed at the end of the column.
X
Modify in particular the values displayed in the second column under
"Properties", and adjust them using the values of the vehicle you
have converted: type name, front edge to emitter (vehicle’s front
edge up to middle of the ultrasonic capsule), rear edge to emitter
(vehicle’s rear edge up to middle of the ultrasonic capsule), vehicle‘s
width.