INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
23
Safety requirements and
regulations
n
Please read the Before you start... chapter, before
you begin any installation and maintenance work on
this appliance.
You must be aware of the following safety requirements &
regulations.
n
Before installation, make sure that the local
distribution conditions (nature of the gas and gas
pressure) and the adjustment of the appliance are
compatible.
n
The appliance must be installed in accordance with
the regulations in force and only in a well ventilated
space.
n
Read the instructions before installing or using this
appliance.
The regulations and standards are as follows:
•
AS/NZS 5601 – ‘Gas Installations’
•
AS/NZS 3000 - ‘Wiring Rules’
In your own interest and that of safety, it is law that all gas
appliances be installed by competent persons.
n
Failure to install the appliance correctly could
invalidate any warranty or liability claims and lead
to prosecution.
The cooker must be installed in accordance with all local gas
fitting regulations, municipal building codes, electrical wiring
regulations and any other relevant statutory regulations.
n
WARNING!
This appliance should not be used in marine craft,
caravans or mobile homes.
Provision of ventilation
This appliance is not connected to a combustion products
evacuation device. Particular attention shall be given to the
relevant requirements regarding ventilation.
The room containing the cooker should have an adequate air
supply.
Install the cooker in a location to allow the complete
combustion of gas, proper flueing and to maintain ambient
temperature of the immediate surroundings at safe limits,
under normal condition.
Location of cooker
The cooker may be installed in a kitchen/kitchen diner but
NOT
in a room containing a bath or shower.
Note:
An appliance for use on Propane must not be installed
in a room or internal space below ground level, e.g. in a
basement.
Conversion
All models are supplied set for use on Natural gas. A
conversion kit for Propane gas is included with the appliance.
See the instructions that are supplied with the conversion kit.
n
We recommend an overpressure shut-off device or
pressure relief valve be used in any LPG installation,
to prevent exposure of downstream fittings /
appliances to excessive pressure (over 7.5kPa), in
event of regulator failure.
After converting the appliance, please attach the Gas
Conversion sticker over the appropriate area of the data
badge – this will identify the gas type for which the appliance
is now set.
9. Installation
Summary of Contents for Professional + FX
