-
boot release.
* The remote boot release will still work with the ignition on.
16. Anti-hijacking Countdown (default=30sec.)
When set as 30 or 60 sec.:
The system will enter the Anti-hijacking mode after 30 or 60 sec. depending on the selection.
The siren will chirp 10 times before entering into the anti-hijacking mode as a last warning.
17. Activate Anti-hijacking Countdown (default=normal)
When set as Normal:
The countdown will start immediately when activating the anti-hijacking feature.
When set as Brake:
The system will enter the Anti-hijacking mode after the footbrake is tapped.
* After the system starts the countdown, press the valet switch before the last 10 chirps
warning to stop the countdown and deactivate the anti-hijacking.
18. Anti-hijacking by Remotes (default=disable)
When set as Enable:
The Anti-hijacking will be activated as follows:
- With the system disarmed and the ignition on.
- Press button #1 for 2 sec. to activate the anti-hijacking and the hazard lights flash once to
confirm.
- The anti-hijacking countdown will start depending on the selection of feature #17. The LED
will flash every 2 secs. once the countdown starts.
- After 30 or 60 sec. depending on the selection of feature #16, the system enters the
Anti-hijacking mode. 10 sec. before the countdown ends, the siren and hazard lights will
activate as a warning.
- When the system is in anti-hijacking mode, the siren will sound and hazard lights flash until
the system is overridden using the emergency override procedure.
19. Anti-hijacking by IDoor (default=disable)
When set as Enable:
The Anti-hijacking will be activated as follows:
- With the system disarmed and the ignition on.
- Opening and closing a door will activate the anti-hijacking and the hazard lights will flash
once to confirm.
- The anti-hijacking countdown will start depending on the selection of feature #17. The LED
will flash every 2 secs. once the countdown starts.
- After 30 or 60 sec. depending on the selection of feature #16, the system enters the
Anti-hijacking mode. 10 sec. before the countdown ends, the siren and hazard lights will
activate as a warning.
- When the system is in anti-hijacking mode, the siren will sound and hazard lights flash until
the system is overridden using the emergency override procedure.
20. Override Code (default= flash 1)
- Follow Section 1.9 to change the Override Code.
- Follow Section 2.6b of the user manual to operate the Override.
