7
D-7) 24-Hour Engine Start Mode
Steps to program 24-Hour Engine Start Mode as 3 hours, 6 hours or off:
Follow the procedure above to enter programming mode and set option 16 as described in the
Programming Option Table.
This feature is convenient to use in the cold winter season.
a>
Press button (1) and (3) once at the same time to activate 24-Hour Engine Start Mode, then
siren will chirp once and the hazard lights flash once to confirm.
Depending on the programmed value, the engine will automatically start every 3 or 6 hours in
each 24-hour period.
b>
Press button (1) and (3) once again at the same time to deactivate this mode. The siren will
chirp twice and the hazard lights flash twice to confirm.
There are 3 situations that the 24-hour engine start mode will be cancelled as follows:
a>
When remote engine start is used.
b>
Doors are opened.
c>
The system is triggered.
D-8) Installation without Remote Starter Features
If the remote starter features are not required, the following wires do not need to be connected:
C1-2Yellow/GreenTo Ignition Start
C1-3Blue/WhiteTo Ignition Acc
C3-5Black/RedTo handbrake light
C4-1GreenTo RPM
C4-2Yellow/BlackTo ignition 2
C4-3Red/BlackTo alternator
E) Suggested Location of Installing the Antenna
* Install the antenna at the right or left upper of the windshield
* Keep the antenna at least 5cm away from the car frame
* Don’t power on the main unit if the antenna is not connected
* Keep the antenna at least 5cm apart from solar control window film
