3
C) Optional Programming Features
The Predator EVO4 has additional features for different types of vehicles.
Read the below programming functions carefully to have the right options programmed for your
vehicle and your needs.
a>
Under the system disarm mode, keep the door open, and switch the ignition on-off, on-off,
on-off and then stay On.
b>
Siren will chirp 2 seconds to confirm entering the programming option mode.
c>
To choose the function #1 - 14, within 10 seconds after taking step# b Press button (1) the
same number of times as the function # you wish to program. Each time you press button (1),
a single short chirp will follow. For example, if you want to choose #11 Start Mode Select,
press button (1) 11 times.
d>
To confirm the selected mode, Press button (2). Siren will chirp as many times as you
pressed button (1) in step C to show the function you chose. For example, if you press button
(1) 11 times in step C, 11 single short chirps will follow.
e>
Now you can program the features and settings by pressing buttons (1), (2) or (3).
When you press button (1), a single chirp will sound, for Button (2) two chirps and button (3)
three chirps to indicate the selected setting has been programmed.
The system will leave the programming mode if there is no action made within 10 seconds your
previous action or the ignition is turned off.
C-1) Programming Option Table
No.
Function
BTN (1)
Chirp Once
BTN (2)
2 Chirps
BTN (3)
3 Chirps
1
Last Door Arming
Disabled Enabled
xxx
2 Passive
Lock Disabled Enabled
xxx
3
Ignition
Lock Disabled Enabled
xxx
4
Door Lock Time
1 Pulse
2 Pulse
4 sec.
5
Siren or Horn
SIREN HORN xxx
6 Alarm
Time 30 Sec.
60 Sec.
xxx
7 Interior
Light
Delay Disabled Enabled
xxx
8 CH3
Output Disabled Enabled
xxx
9 Auto
Re-Arm Disabled Enabled
xxx
10 Anti-Hijacking Disabled Enabled
xxx
11 Car
Type Automatic Manual
xxx
12
Start Mode Select
Alternator TACH
xxx
13 Alternator
Voltage
4.5V 9V xxx
14 Crank
Time 0.6 Sec.
0.8 Sec.
1.0 Sec.
15
Start Running Time
10 Min.
20 Min.
16
24 Hour Engine Start Every……
3 Hour
6 Hour
Off
No. 8: When DISABLED: A constant negative output will be sent through CH3 by pressing
button (2) for over 2 Sec.
No. 8: When ENABLED: A 30 seconds constant negative output will be sent through CH3 by
pressing button (1) to arm the system.
*Note: The factory defaults are pre-programmed as per the third column (grey color box).
C-2) Last Door Arming
Steps to enable Last Door Arming:
a>
With the alarm disarmed, open and hold the door, and switch the ignition on/off three times,
and then switch to On.
b>
The siren will chirp for 2 seconds to confirm entering into the programming option mode.
