background image

21

Using Your Induction Cooker

If you have not used an induction cooker before please be 

aware of the following:

• 

Make sure that the pans you have or buy are suitable 

for use on the induction hob. Stainless steel, enamelled 

steel or cast iron is ideal. Double check before you 

buy pans – they must have bases that would attract a 

magnet.

• 

Allow time to get used to induction cooking; it is fast 

and powerful as well as being gentle. When simmering, 

you may notice that liquids appear to stop bubbling and 

then start again almost immediately. This is perfectly 

normal.

• 

You may notice a faint vibrating sound coming from 

the pans when using the induction hob. Again, this is 

perfectly normal and will depend upon the type and 

style of pans you are using.

• 

The induction heating elements will phase on and off 

when cooking. Although an active cooking zone may 

appear to switch on and off, a constant heat is still being 

supplied to the base of the pan – this is completely 

normal.

Tips on cooking with the timer

If you want to cook more than one dish, choose dishes that 

require approximately the same cooking time. However, 

dishes can be ‘slowed down’ slightly by using small containers 

and covering them with aluminium foil, or ‘speeded up’ 

slightly by cooking smaller quantities or placing them in 

larger containers.
Very perishable foods such as pork or fish should be avoided 

if a long delay period is planned, especially in hot weather.

 

n

DO NOT place warm food in the oven to be timed.

 

n

DO NOT use a timed oven that is already warm.

 

n

DO NOT use the timed oven if the adjoining oven is 

already warm.

Whole poultry must be thoroughly defrosted before being 

placed in the oven. Check that meat and poultry are fully 

cooked before serving.

General oven tips

The wire shelves should always be pushed firmly to the back 

of the oven.
Baking trays with food cooking on them should be placed 

level with the front edge of the oven’s wire shelves. Other 

containers should be placed centrally. Keep all trays and 

containers away from the back of the oven, as overbrowning 

of the food may occur.
For even browning, the maximum recommended sizes of 

baking tray are:

• 

depth: 340 mm (13 3/8”) by width: 340 mm (13 3/8”) in the 

main oven 

• 

depth: 321 mm (12 5/8”) by width: 232 mm (9 1/8”) in the 

tall oven.

When the oven is on, DO NOT leave the door open for 

longer than necessary, otherwise the knobs may get very 

hot. 

• 

Always leave a “finger’s width” between dishes on 

the same shelf. This allows the heat to circulate freely 

around them.

• 

To reduce fat splashing when you add vegetables to hot 

fat around a roast, dry them thoroughly or brush lightly 

with cooking oil.

• 

Where dishes may boil and spill over during cooking, 

place them on a baking tray.

• 

The ‘Cook & Clean’ oven liners (see ‘Cleaning Your 

Cooker’) work better when fat splashes are avoided. 

Cover meat when cooking with foil or use a roasting 

bag.

• 

Sufficient heat rises out of the oven while cooking to 

warm plates in the grill compartment.

• 

If you want to brown the base of a pastry dish, preheat 

the baking tray for 15 minutes before placing the dish in 

the centre of the tray.

5.   Cooking tips

Summary of Contents for Nexus 90 Induction

























































Reviews: