16
FRONT
Rear stop
Front
bracket
Accessories
Glide-out Shelves
The oven shelves (
Fig. 2.30
) are retained when pulled
forward but can be easily removed and refitted.
Both ovens are supplied with glide-out oven shelves.
To fit the glide-out shelves, hook the front of the shelf onto
the runners as shown (
Fig. 2.31
). The rear of the shelf should
rest on the runners, in front of the rear stop (
Fig. 2.31
).
The glide-out shelves and runners can be easily removed or
repositioned.
To remove the glide-out shelves
Raise the rear of the shelf, so that it clears the rear stops. Then
unhook from the front locating bracket.
To remove the glide-out runners
Twist to unclip the base of the runners from the shelf
supports. Then unhook the runner from the top rung of the
shelf support and remove (
Fig. 2.32
).
To refit the glide-out runners
Hook the rear of the runner over the top rung of a pair of shelf
supports. Then hook the front of the runner onto the same
rung. Push to clip under the bottom rung (
Fig. 2.33
).
Ensure that the shelf runners are fitted in the same position
on each side (
Fig. 2.34
).
The front of the shelf runners can be identified by the bracket
(
Fig. 2.31
).
n
n
DO NOT put the glide-out shelf runners in a
dishwasher.
Fig. 2.30
Fig. 2.31
Fig. 2.32
Fig. 2.33
Fig. 2.34
1
2
2
1
Shelf guard
Front