Falcon Mercury 1082 Induction User'S Manual & Installation Instructions Download Page 23

Page: 23 / 36

INSTALLATION

Check the appliance is electrically safe when you have finished.

Dear Installer

Before you start your installation, please complete the details

below, so that, if your customer has a problem relating to

your installation, they will be able to contact you easily.

Safety Requirements and Regulations

You must be aware of the following safety requirements &

regulations.

This cooker must be installed in accordance with

the relevant instructions in this booklet, with the

relevant national and local regulations, and with the

local electricity supply companies’ requirements.

The appliance must be installed in accordance with

the regulations in force and only in a well-ventilated

space.

Read the instructions before installing or using this

appliance.

This appliance is designed for domestic cooking

only. Use for any other purpose could invalidate any

warranty or liability claim.

Provision of Ventilation

This appliance is not connected to a combustion products

evacuation device. Therefore, particular attention must be

given to the relevant requirements regarding ventilation.
All rooms require a window that can be opened, or

equivalent, while some rooms require a permanent vent in

addition to the window.

Location of Cooker

The cooker may be installed in a kitchen/kitchen diner but

NOT in a room containing a bath or shower.

You will need the following equipment to complete the

cooker installation satisfactorily:

•

Multimeter (for electrical checks).

•

Allen keys (provided in pack).

You will also need the following tools:
1.

Steel tape measure

Cross-head screwdriver

Flat head screwdriver

Spirit level

13 mm spanner or socket wrench

Checking the Parts:

7. Installation

ArtNo.050-0011 - Installer information table

Installer’s Name

Appliance Serial Number

Installer’s Telephone Number

Installer’s Company

Grill pan, trivet & cradle

1 telescopic shelf

1 drop shelf

1 flat shelf

Tall oven shelves & supports

Bottom panel & mounting

brackets

ArtNo.000-0010 Tall oven shelves

Flue trim & flue vent

Oven Base Tray

Side panels & obscuring trims

Side panel mounting brackets

Summary of Contents for Mercury 1082 Induction





































Search results

Summary of Contents for Mercury 1082 Induction

Reviews:

Related manuals for Mercury 1082 Induction

Brands by name

Popular brands

Falcon Mercury 1082 Induction, User'S Manual & Installation Instructions

Search results

Summary of Contents for Mercury 1082 Induction

Reviews:

Related manuals for Mercury 1082 Induction

Brands by name

Popular brands