Falcon Mercury 1082 Induction, User'S Manual & Installation Instructions

Page: 10 / 36

6
increase the heat, just turn the control knob to the required
level.
Power Boost Setting,
P
All of the induction cooking zones have Power Boost
available, activated by turning the control knob clockwise
until [
P
] is shown on the hob control display.
Power Boost allows additional power to be made available for
each of the cooking zones. This is useful to bring a large pan
of water to the boil quickly.
The Power Boost function operates for a maximum
of 10 minutes on each zone, after which the power is
automatically reduced to setting 9.
When using the Power Boost function, the cooking zones are
linked.
Fig.2-8 shows the hob layout. Zones A and B are linked
together as are zones D and E.
This means that when using zone A on Power Boost and then
switching zone B to Power Boost, then the power to zone A
will reduce slightly. The last zone switched to Power Boost
always takes priority. Zones D and E work in the same way.
n n
This is a built in safety device.
Deactivate the Power Boost function by turning the control
knob to a lower setting.
Overheat Function
This function identifies when the temperature of the pan rises
rapidly and works to maintain a safe level of pan temperature.
It should not interfere with normal cooking.
n n
Please remember not to leave the hob unattended.
Care should be taken to not allow your cookware to
boil dry.
A D
B E
C
A & B linked D & E linked
Fig.2-8