Falcon M Series, Service Manual, Page: 6 / 48

M-Series Service Manual
3
Function ANSI A156.13, 2005 Page
SCHLAGE ANSI DESCRIPTION OUTSIDE FUNCTION INSIDE FUNCTION
M101
F01-1
F01-2 Passage/Closet
Latchset Latch bolt by levers at all
times. Latch bolt by levers at all
times.
11
M161 -
Connecting
Room/Exit
Latch
Non-removable blank plate.
Deadlocking latch bolt by
inside knob/lever.
12
M301
F02-1
F02-2
Privacy Lock
Latch bolt by knobs/levers,
emergency key (012727-
000-30).
Latch bolt by knobs/levers.
Deadbolt by turn.
13
M311
F19-1
F19-2
Privacy,
Bedroom or
Bath Lock Latch bolt by knobs/levers.
Deadbolt by emergency key
(012727-000-30).
Latch bolt by knobs/levers.
Deadbolt by turn. Rotating
inside knob/lever retracts
both bolts.
14
M321
F22-1
F22-2
Privacy Lock
Latch bolt operated by knob/
lever from either side except
when outside knob/lever
is locked by inside T-turn.
Emergency key (012727-
000-30) furnished with lock.
Operating inside knob/lever,
closing door or operating
outside emergency release
unlocks outside knob/lever.
15
M371
F14-1
F14-2 Store Door
Lock
Latch bolt by knobs/levers.
Deadbolt by key from either
side. Latch bolt by knobs/levers.
Deadbolt by key from either
side.
16
M381
F09-1
F09-2 Entry/Restroom
Lock
Deadlocking latch bolt by
knobs/levers except when
outside knob/lever is locked
by key inside, then by key
outside.
- 17
M411 - Asylum Lock
Deadlocking latch bolt by
key from either side. Both
knobs/levers rigid. Deadlocking latch bolt by
key from either side. Both
knobs/levers rigid.
18
M431 -
Classroom
Security Lock
with Deadbolt
Retracted by knob/lever from
either side, except when
outside lever is locked; latch
bolt then retracted by key
outside.
Retracted by knob/lever
from either side, except
when outside lever is
locked; latch bolt then
retracted by rotating lever
inside. Deadbolt thrown or
retracted by key only.
19
Functions
To order Falcon M Series locksets, please consult page 19 for ordering information and assistance.
Indicates interchangeable core available.
Catalog Number Prefi xes: Add the following prefi x for the appropriate trim style.
MM (example: MM521) = Knob Trim
LM (example: LM521) = Lever Trim
Note: If a special function is required and not listed here, please contact the factory for assistance.