Falcon FDZ60, Installation, Operation And Maintenance Instructions

Page: 7 / 12

TROUBLESHOOTING YOUR DUAL ZONE WINE STORAGE UNIT
6
Before Calling for Service
Before calling for service, check the troubleshooting table on this page. This
table lists possible problems that you can remedy without difficulty to avoid an
unnecessary service call.
PROBLEM POSSIBLE CAUSES/SOLUTIONS
Odor in cabinet 1. Interior needs cleaning
Noisy operation
1. Cabinet not level
2. Weak floor
Cabinet vibrates
1. Cabinet not level
2. Weak floor
Cabinet light not working
1. Tube burned out
2. No power at outlet
Appliance will not run
1. “ON/OFF” button pressed
2. Power cord not plugged in
3. No power at electrical outlet
4. House fuse blown
Appliance runs too long
1. Prolonged door openings
2. Control set too cold
3. Condenser needs cleaning
Moisture collects inside
1. Too many door openings
2. Prolonged door openings
3. Hot, humid weather increases condensation
Moisture collects on out-
side surface 1. Hot, humid weather increases condensation
(as humidity decreases, moisture will disappear)
Interior too hot/too cold 1. Control improperly set
Sentry System
™
refrigeration monitor
activated
1. See “Warning Alarms” on page 3
2. See “ Sentry System
™
Control Quick
Reference”
3. Temperature alarm may occur after user
selected temperature set point changes in ex-
cess of six (6) degrees C or during heavy usage
conditions. This is normal and not a fault of the
appliance. The
Sentry System
™
is monitoring
the duration of large swings in temperature to
protect your contents, and may alert you to this
event. See “Reset Alarms” on page 3.
Help Prevent Tragedies
Each year children die because they
climb inside a discarded refrigera-
tion product, get trapped inside and
suffocate. Take precautions to prevent
such tragedies by removing the door
or by taping or chaining it shut before
discarding.