Falcon FDS-Wi, User Manual

Page: 55 / 76

www.rletech.com 55 970.484.6510
4
Web Interface – Integration Version
4.2.6 BACNet
The BACNet configuration section allows users to configure several settings.
Figure 4.12 BACNet Section
The BACnet pics link displays general BACnet capabilities of the device (e.g., what LAN
options are available).
4.2.7 Modbus
The Modbus section allows users to configure the Modbus settings for the system.
Figure 4.13 Modbus Section
Option Description
Device ID Assign a name to uniquely identify each BACnet device on the
network.
Device Name Assign a name - up to 40 characters - to the unit for BACnet
discovery/integration.
Description Add any additional details about the device. 40 characters,
maximum.
UDP Port The default port is 0=47808. If a you would like to use a specific
port for security reasons, enter a new port number in this field.
Table 4.7 BACNet Section Options
Option Description
Modbus/TCP/UDP
Slave Unit Identifier
The default slave unit identifier is 0, which disables this feature.
To enable this option, enter a TCP/UDP slave address from 1-254
in this field. In most instances, the identifier is typically set at 1.
Table 4.8 Modbus Section Option