11
4 INSTALLATION
4.1 ASSEMBLY
4.1.1 Position appliance and level using feet or castor adjusters as shown below.
4.2 EQUIPOTENTIAL CONNECTION
4.2.1 This appliance is also provided with a terminal for connection of an external
equipotential conductor. This terminal is in effective electrical contact with all
fixed exposed metal parts of the appliance, and shall allow the connection of
conductor having a nominal cross-section area of up to 10mm². It is located at
the rear of the unit and identified by the following label and must only be used
for bonding purposes.
4.3 SUITING
