![background image](http://html1.mh-extra.com/html/falcon/f2/f2_user-manual_3327313020.webp)
FALCON F +
USER MANUAL
DCI DigiGuide
10.31.2022
DIGITAL CONTROL, INC
20
After using one of the Advanced methods to pick the bands, you will pair
them with the transmitter and then calibrate.
BASIC - QUICK SCAN PAIR
STEP 1 OF 8
Before You Start
Basic - Quick Scan Pair
scans noise and selects the best frequencies for the
preset Up and Down bands. These presets may not be the best bands for the
jobsite.
Use
Advanced - Scan Pick Pair t
o view noise on all bands.
STEP 2 OF 8
Ensure all transmitters are powered off or more than 30.5 m away from the
locator.
Inspect the job site and move locator to active noise area of concern or deep
part of bore - keep locator above and parallel to bore path.
STEP 3 OF 8
From the Main menu, select
Quick Scan Pair.
STEP 4 OF 8
Confirm the pre-set bands and the power mode.