Falcon Classic 110 gas, User'S Manual & Installation Instructions

Page: 22 / 48

18
ArtNo.302-0002 - 6BC annotated
ArtNo.302-0002 - 6BC annotated
ArtNo.302-0002 - 6BC annotated
ArtNo.302-0002 - 6BC annotated
ArtNo.302-0002 - 6BC annotated ArtNo.302-0002 - 6BC annotated
ArtNo.302-0002 - 6BC annotated
then press any button to stop the beep. Press [

] to return to
manual cooking.
Setting a Cook End Time
Press and hold the ‘ stop time’ [

] button (Fig. 3.23) and then
press the [+] button (or [–] button) until the required ‘stop
time’ shows (Fig. 3.24). The [

] symbol and [AUTO] will show
in the display.
Once the
‘stop time’ is reached, the beeper sounds and the
[AUTO] symbol flashes. Turn the oven control knob to 0 and
then press any button to stop the beep. Press [

] to return to
manual cooking.
To Start and Stop the Ovens Automatically
Before you set the clock for automatic operation you must
have two numbers clearly in mind – the ‘cook period’ and the
‘stop time’.
Note:
You cannot set a start time directly – this is set
automatically by setting the ‘cook period’ and the ‘stop time’.
Press and hold the [

] button (Fig. 3.25) and then press
the [+] button (or [–] button) until the required ‘cook period’
shows (Fig. 3.26).
Now press and hold the [

] button (Fig. 3.27) and then
press the [+] button (or [–] button) until the required ‘stop
time’ shows (Fig. 3.28). Release the buttons.
[AUTO] will now show in the display (Fig. 3.29).
Set the oven(s) to the required temperature. When cooking
is finished [AUTO] will flash and the beeper will sound. Turn
the oven knob(s) to the OFF position first, and then press any
button once to stop the beep; press the [

] button to return
to manual cooking.
If you are out, do not worry about the beeper going off, it
stops after a while. When you return, turn the oven knob(s) to
0 first, and then press [

] to return to manual cooking.
AUTO is Showing, You Want to Reset to Manual Cooking
To return to manual cooking mode from an Automatic
setting, simultaneously press the [+] and [-] key, this will clear
the automatic program and return to manual mode.
Please note that this action will also clear the [Minute Minder]
setting.
Beeper Tone Adjustment.
The beeper tone can be adjusted to three different levels.
Whilst in the time of day mode, press and hold the [-] button
for a period until the display shows the Tone Bars (Fig. 3.30).
Release the [-] button and immediately press again, this will
adjust the tone down by a bar. Continue the process until a
comfortable, tone is reached.
Please note, during a power reset the clock will remember the
last tone set.
For an overview of the functions refer to Table 3.1.
Fig. 3.23 Fig. 3.24
Fig. 3.25 Fig. 3.26
Fig. 3.27 Fig. 3.28
Fig. 3.29
Symbol Function Notes
[

] Sets the Minute Minder Used with the [+] and [-] buttons
[

]
Sets the duration / cook
period
Used with the [+] and [-] buttons
[

]
Sets the end / stop cook
time
Used with the [+] and [-] buttons
[

]
or
[

] & [

]
Allows the time of day to
be set when ‘AUTO’ is not
active
Used with the [+] and [-] buttons
[

]
Resets the cooking
control to manual
[ - ]
Decreases time interval
Holding this button down
allows a quick set
[ + ]
Increases time interval
Holding this button down
allows a quick set
[ + ] & [ - ]
Clears all ‘AUTO’ and
minute minder programs
Table 3.1
ArtNo.302-0002 - 6BC annotated
Fig. 3.30