4
CAUTION!
Never attach hoists to bollards, railings or other detachable parts of the boat.
4.1 Lifting the boat
When lifting the boat, we recommend to use a proper frame. Lifting without frame will cause
considerable large compressive force to the hull of the boat and may cause damage to it
. If not
using a frame, make sure that the hoisting belts are long enough. Hoists are long enough when the
angle between them is about 20 degrees. During the lift, be careful with the rails and other equipment.
Make sure that the boat is well balanced.
Cover the hoists with soft material to prevent scratches.
Do not stand under the boat as it is lifted.
4.2 Transportation
If you transport the boat by trailer,
check with the dealer that it is suitable for the model in
question.
Ensure that the keel is positioned straight on the middle rolls and that the side supports
prevent the boat from moving back and forth. It is meant that the keel takes all the weight, and the
side supports keep the boat in correct position. Attach the transportation ropes. Do not leave any
loose objects on board during transportation. The boat should be transported unloaded.
ATTENTION! Boat
’s trailer weight is 640 kg. Make sure your
trailer has enough capacity to carry the weight.
4.3 Before launching the boat
Check the following items with the naked eye before launching the boat:
- fastenings (make sure they are tight)
- hoses, tanks, valves, outlets/inlets and rainwater drainage
- electrical wiring
- any damage
Check these regularly throughout the season.
4. Transporting the boat
E
N
G