Falcon 90 toledo, User Manual

Page: 19 / 60

17
English
6. Installation
Dear Installer
Before you start your installation, please complete the details
below, so that, if your customer has a problem relating to
your installation, they will be able to contact you easily.
Safety Requirements
The cooker must be installed in a well-ventilated space, in
accordance with the section entitled
‘Electrical Connection’ .
Read these instructions before installing or using the
appliance.
Provision of Ventilation
This appliance is not connected to a combustion products
evacuation device. Therefore, particular attention must be
given to the relevant requirements regarding ventilation.
All rooms require a window that can be opened, or
equivalent, while some rooms require a permanent vent in
addition to the window.
Location of Cooker
The cooker may be installed in a kitchen/kitchen diner but
NOT in a room containing a bath or shower.
This appliance is designed for domestic cooking only. Use for
any other purpose could invalidate any warranty or liability
claim.
You will need the following equipment to complete the
cooker installation satisfactorily:
•
Multimeter (for electrical checks)
•
Cooker levelling tool with Allen keys (provided in pack)
You will also need the following tools:
1. Electric drill
2. Masonry drill bit (only required if fitting the cooker on a
stone or concrete floor)
3. Wall plugs (only required if fitting the cooker on a stone
or concrete floor)
4. Steel tape measure
5. Cross-head screwdriver
6. Flat-bladed screwdriver
7. Spirit level
8. Pencil
9. Adjustable spanner
Checking the parts:
Levelling tool and Allen keys Grill pan and trivet
ArtNo.000-0002 Classic tools
ArtNo.330-0001 - Grill pan
1 flat oven shelf and 1 drop shelf Handyrack
ArtNo.324-0011 Flat & drop shelves
ArtNo.324-0003 Handyrack
Roasting tin Plinth
ArtNo.324-0004 Roasting tin
ArtNo.000-0007 Plinth
Tall oven shelves and shelf
supports
ArtNo.000-0010 Tall oven shelves
ArtNo.050-0011 - Installer information table
����������������
�����������������������
����������������������������
�������������������
ArtNo.065-0004 - Installation - 90 induction