HOW TO CHANGE THE PRESET ON AIR
ENG
Page 7
3 HOW TO CHANGE THE PRESET ON AIR
The processor has 100 curves: the factory presets (PR) are stored in positions 00 through 49, while positions
50 to 99 may be set by the operator.
Before creating a new custom curve, we recommend that you carefully evaluate the factory presets,
all of which are suitable for immediate on-air use given their average content of the various signal
components.
To change the Preset currently on-air, double click the PRESETS block.
The CHANGE PRESET mask shows the current Preset (On Air), while the alternative one is shown in the
Preset field.
Using the mouse wheel or the +/- keys scroll the Preset list till You reach the desired new curve.
Pressing LOAD, the new Preset will be put on air immediately, while the CHANGE PRESET screen will not
close allowing You to select a new Preset, if desired.
Pressing OK, the new Preset will be put on air immediately, and the CHANGE PRESET screen will close.
The software screen header will now show the selcted Preset: