Falcon 1092 CKR, User'S Manual & Installation Instructions

Page: 17 / 36

13
Stainless Steel Main Top
Lift away pots or pans from the main top. Remove the pan
supports from the spillage area and carefully place in a sink of
warm soapy water.
Wipe loose debris from the main top. Avoid using any
abrasive cleaners including cream cleaners. For best results
use a liquid detergent cleaner. Rinse with cold water and
thoroughly dry with a clean, soft cloth. Make sure all parts are
dry before repositioning.
French Cooktop
Note: The enamel finish of the cooktop is very durable but
it can be damaged by certain cleaning materials. Acids can
attack the finish. Any spills of vinegar (acetic acid) or fruit
juices (citric acid), etc. should be cleaned off as soon as
possible.
Allow the cooktop to cool completely before cleaning.
Clean with caution. If a wet sponge or cloth is used to wipe
spills on a hot surface, be careful to avoid steam burns. Some
cleaners can produce noxious fumes if applied to a hot
surface.
Always clean the cooktop after use. It should only be cleaned
with a soft cloth wrung out in clean hot soapy water but take
care that no surplus water seeps into the appliance. Wipe
with a clean dampened cloth then polish with a dry cloth.
For stubborn stains, a nylon washing up brush and hot soapy
water can be used.
For more thorough cleaning, take the cooktop off the hob.
Allow it to cool completely before removing: take care
because the cooktop is heavy.
Remove the centre ring
(Fig.5-4) , then lift off the cooktop.
After cleaning, dry and replace carefully on the hotplate. If the
cooktop is dropped on the hotplate, the support feet could
damage the finish. Carefully place the cooktop in position,
with the Falcon name at the front
(Fig.5-5)
. The front of
the cooktop should be level with the front of the outer pan
supports.
Refit the centre ring.
n n
NEVER USE CAUSTIC OR ABRASIVE CLEANERS AS
THESE WILL DAMAGE THE SURFACE.
Fig.5-4
Fig.5-5