ENG
Axel Technology srl
www.axeltechnology.com
TECHNICAL APPENDIX
34
19 TECHNICAL APPENDIX
This section provides all the technical explanations, and the connection Pin Outs to and from the Falcon Three TV SDI.
Always refer to this technical appendix for connections and connection procedures. In case of differences between the
documentation below and the hardware device please contact Axel Technology at the numbers and e-mail addresses
shown at the end of this manual. Our technical and assistance department will be pleased to help you!
19.1 APPENDIX A
– BALANCED AUDIO CONNECTION AND PINOUT
Balanced Audio connection diagram with balanced XLR for
Analogue
audio
input
and
output
(Left+Right) and
AES/EBU digital audio
input
and
output
.
19.2 APPENDIX B
–RS232 SERIAL CONNECTION E PINOUT
PORT 1
PORT 2,3,4
2
Tx
2
Tx
3
Rx
3
Rx
4
DTR
4
/
5
GND
5
GND
A standard Pin-to-Pin serial cable is required for the PC connection, not a CROSSOVER one. For a correct connection
the cable must not be more than 20 m long. Ports 2 and 3 use only the Tx, Rx and GND for the PC connection while port
1 also has the DTR (Data Terminal Ready) for modem connection. The port connection speed must coincide with the
speed of the port of the Falcon Three TV SDI and of the PC’s serial port.
2
2
3
3
4
4
5
5
RS 232 Male
RS 232 Fem ale
