2515 Bypass Rd. Flemingsburg, KY 41041
606-845-7439
Instructions for Installation and Care of Honda Pioneer 1000 5 Full Cab Fits Lexan Windshield
HO-P10005-FC05
Notice: Do not smoke inside the cab or expose the enclosure to direct flames. Cab is Flammable.
Be sure to read these instructions thoroughly before opening and installing the enclosure. The installation is
best done when the temperature is 70 degrees F. or warmer. The temperature affects the adhesive Velcro, if
conditions prevent installing in warmer weather it helps to store the adhesive Velcro at room temperature
prior to installation.
1.
Carefully open the carton and remove the enclosure on a large flat surface that is clean and free of dirt.
2.
Check over the parts included in the carton with the parts list shown below:
Adhesive Velcro Hook Strips:
Soft Front Doors
“ “ “ “
16 each------------3"
“ “ “ “
2 each------------5"
“ “ “ “
2 each------------6"
“ “ “ “
2 each------------8"
Snap Studs ------------------------------ 11 each (1 extra )
---------------------------------------------------------------------------
Soft Rear Doors
“ “ “ “
12 each------------3"
“ “ “ “
2 each------------2"
“ “ “ “
2 each------------9"
Snap Studs ------------------------------ 9 each (1 extra)
---------------------------------------------------------------------------
Adhesive Velcro Hook Strips:
Middle Rear Window
“ “ “ “
8 each------------3”
“ “ “ “
1 each------------47”
---------------------------------------------------------------------------
Adhesive Velcro Hook Strips:
Rear Rear Window
“ “ “ “
6 each------------3”
“ “ “ “
1 each------------64”
---------------------------------------------------------------------------
Top Cap
Webbing Straps w/ Velcro
4 each
Webbing Straps w/ Grommets
2 each
Webbing Straps w/Loop
2 each
Adhesive Velcro Hook Strips:
4 each-------------6”
If any parts are damaged or missing please contact customer service at (606) 845-7439.
