SAMBA 55/56
VERSION 1.03
To the next window click the
Finish
button, the modem driver
for the SAMBA device is now installed.
The SAMBA status LED labelled “
ERR
” will be turned off.
Close all opened windows.
Do not remove the CD from drive, the configuration software
has to be also installed.
Click
Start
button, point to
Settings
, then click
Control Panel
.
Double-click the
System
icon.
Select the
Hardware
register and click on the
Device Manager
button, open the item
Modems
and select the
SAMBA USB
Modem Driver,
click to the properties button by using the
right-mouse click.
On the next opened window screen select the
Diagnosis
tab, to
test the modem, if it works properly , just click the Q
uery
modem
button. If the modem response then the modem is
ready for use. Click
OK
buttons to close the opened windows.
Now you have to install the WellPhone software, which is also
included into the delivered CD-ROM.
Note:
Engineering samples of the SAMBA55-SET include limited version
of the “WellPhone” configuration software with a licence key that is
valid for 3 months after installation. Unlimited version of the
“WellPhone” application software is available for all production
units. Please contact your local FALCOM supplier for further
details.
5.
Install the configuration software:
The instructions below describe how to use the SAMBA to a laptop
Computer running Windows 2000 to make a GPRS internet Dial-up.
The “GPRS Controller” is a software that enables you to make
Internet connections. It is available in two different forms with
similar functions. Please refer to the corresponding user manual. If
desired to use Microsoft Windows tools please see attached section
. During the installation of the SAMBA software, please follow
the on-screen instructions.
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 28
