SAMBA 55/56
VERSION 1.03
6 Getting
started
6.1 Installing your SAMBA in a Laptop computer running
Windows® 98, 2000, ME, XP
This chapter explains how to install the SAMBA in a laptop computer.
It is recommended that all important files are backed up prior the
installation.
1. Inserting the SIM card:
After the unpacking
SAMBA requires a small SIM card, which is provided by your mobile
phone service provider. This contains the telephone number of SAMBA
will use, as well as other customer information.
If your SIM is larger credit-card size, it may have a snap-out area that
allows the small SIM to be removed by gentle twisting. Otherwise
apply to your service provider for a small SIM.
The SIM card must be enabled for all the service that you want to use –
VOICE, DATA, and/or FAX; if in doubt contact your service provider.
a) To insert the SIM card:
Insert the SIM card into the corresponding SIM card reader of
modem and slide it forward until it stop. The bevelled corner of
SIM card has to be on the left side of SIM card reader and the
golden contact area is facing downwards. Make sure that the
SIM card is sit firmly into the SIM card reader slot. See also
figures below.
Figure 9:
Place the SIM Card.
Figure 10:
Push it forward into the SIM-
Card reader.
b) To remove the SIM card:
To remove the SIM card please just push it forward, it jumps
out, so you can take it out.
Important:
Do
not
insert or remove the SIM card when the
device is under power.
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 24
