every four months. The saturation of the active carbon filter depends on the
frequency of use of the appliance, by the type of cooking and the regularity
of cleaning the antigrease filters. (Fig.14) To remove the charcoal filters
place on hand on one filter at a time and turn it toward the front part. The
charcoal filter can now be removed. Always ensure to replace both filters at
the same time.
•
Clean the fan and other surfaces of the cooker hood regularly using a cloth
moistened with denatured alcohol or non abrasive liquid detergent.
• The illumination installation is designed for use during cooking and not for
prolonged general illumination of the environment. Prolonged use of the
illumination installation notably reduces the duration of the bulb. Use a
one-edged screwdriver or any other appropriate tool to lift and remove the
overhead light fixture. Replace the damaged lamp. Use only halogen lamps
as the original specification, avoiding contact with hands. Return the light
fixture to its position (snap fastening). (Fig. 15)
•COMANDS PATTERN :
( Fig.16)
•COMANDS PATTERN :
( Fig.17)
A= OFF
B= SPEED I
C
= SPEED II
D
= SPEED III
E =LIGHT
A= TIMER --- 15 MINUTES
B= SPEED I / OFF
C
= SPEED II / OFF
D
= SPEED III / OFF
E =LIGHT
•
If your appliance does not have the
INTENSIVE
speed function, press key
A for two seconds and it will be activated for 15 minutes after which it will
return to the previously set speed. When the function is active the LED
flashes.
By pressing any key for the exclusion of the hood light the hood will return
immediately to its normal functioning.
15
Summary of Contents for HEE82-900MM
