Falco HEE22-600MM, Use And Care Manual

Page: 13 / 15

C= Speed S1/ “-” adjust / off
D= Digital display
E= Speed S1/ “+” adjust / off
F= Alarm
G= Light
When the Key A is flashing, at the same time
“ ”
is flashing on the
digital display, it reminds the user to clean the filters. After it’s cleaned and
then assemble back, push the key A till the light is off to set the function
again.
When pushing key A for 3 seconds, the clock “
”
on the digital display
flashing, push key A to switch to set hours and minutes, and then push C
or E to set the correct time. The Clock’s system is 24 hours.
When the motor is on, push the key B, the light is on, at the same time it
shows
“ ”
is flashing as well on the digital display
，
and to push
key B to switch hours and minutes, and it’s to set the time to automatically
shut off the motor by pushing key C or E. Push key B for 3 seconds to stop
the delay timer.
Push key C or E, the first speed is on, and it shows
“ ”
on the digital
display
，
and push key C once again to turn off
；
To run the 2
nd
, 3
rd
and
“Turbo” speed, then push Key E. If it’s
“
Turbo
”
speed on, then push E
once again to turn off; and to push key C down to 3
rd
, 2
nd
and 1
st
speed.
On the special function set, after the speed “TURBO” runs for 2
minutes, it automatically switches to 3
rd
speed.
Push the key F, the light is flashing, and it shows
“ ”
flashing on
the digital display
，
to push key F to switch hours and minutes
，
and to set
the alarm time by pushing the key C or E. To stop the alarm, push the key
F. And to cancel the alarm set, then push the key F for 3 seconds.
Push the key G, the light is on, and it shows
“ ”
on the digital display,
and push the G again to turn off the light.
Troubleshooting
Problem Possible reason Solution
Check the plug is connected Hood doesn’t work No electric supply
Check the main switch is turned on
Aluminum grease
filters clogged Clean the filters and replace when
dry Poor airflow
Charcoal filters
clogged Replace the charcoal filters