II.
MONTHLY CLEANING OF THE GREASE FILTER (ALUMINIUM)
Clean the filter monthly to prevent fire hazards due to oil build up.
The grease filter collects oil, so its cleanliness directly affects the
extractor’s efficiency.
If not cleaned regularly, the grease build up
will block the air from flowing through and thereby affect the suction
rate of the extractor.
Clean it by removing from the extractor and submerging into hot
soapy water and giving it a very gently clean with a cloth.
III.
ANNUAL REPLACEMENT OF THE CARBON FILTERS
This only applies to extractors which are recirculating the air back into
the kitchen space (not ducting outside).
Charcoal filters need to replaced once a year by purchasing at
IV.
BULB REPLACEMENT
1. Switch off the unit and unplug.
2. Open the front glass flap of the unit to expose the aluminum
filter, then remove the aluminium filter so that the motor is
exposed.
3. The LED Light fitting can now be pushed out.
4. Once removed, simply disconnect it and replace with the same
type (max 1.5W).
23
