7
GB
O
R
I
G
I
N
A
L
I
N
S
T
R
U
C
T
I
O
N
S
Weight measurement
After having placed the scale on the substrate, press gently the surface of the scale and then wait until the display shows 0.0.
This indicates the scale taring.
Stand with your both feet on the scale, wait for the display indications to stabilize.
Note! In case of scales fi tted with sensory measurement, stand on the scale with bare and dry feet. Otherwise all readings except
of body weight will not be correct or possible. Stand on the scale in such a way that the display is in front of your feet.
Carefully leave the scale.
The scale will automatically switch off the display after approx. 20 sec from last measurement or last use. This will enable pro-
longing the time of use with one battery set. The scale will be re-started after pressing the switch or gentle pressing the scale
surface.
Note! In case of scales fi tted with sensory measurement, too dry feet may obstruct or prevent the measurement. Slightly moisten
your feet but they must not be wet to avoid risk of slippery.
Linking the scale with mobile device
Thanks to Bluetooth ® technology it is possible to transmit the scale’s measurements to mobile device e.g. mobile phone or tablet
with Android™ or iOS™ operating system.
The scale works with devices with Android™ version 4.3 or newer operating system and iOS™ version 7.0 or newer operating
system. Regardless of the type of operating system, a mobile device must support Bluetooth ® version 4.0 or newer standard.
Due to many diff erent mobile device solutions, TOYA SA is not able to guarantee the correct work with each mobile device avail-
able on the market.
Bluetooth ® is a registered trademark of Bluetooth SIG, Android™ is a registered trademark of Google Inc., iOS™ a registered
trademark of Cisco Systems, Inc.
In the fi rst place download and install OKOK International application on your mobile device. The application may be downloaded
from Google Play store for Android™ operating system or from App Store for devices with iOS™ operating system. You will fi nd
on product packaging and in user manual the QR codes that after scanning by your mobile device will allow redirecting directly to
a website with application in Google Play or App Store.
Start the Bluetooth ® on your mobile device and then start OKOK International application. Then proceed in accordance with app’s
manual which allows linking (pairing) of your mobile device with the scale. For fi rst application start-up, the user may be asked
to provide data allowing him/her using possibilities of sensory measurement in full. If the scale has not been fi tted with sensory
measurement sensors only the body weight shall be sent to application.
Please follow app’s messages and complete subsequent steps regarding the application. In case of any doubts, read the docu-
mentation attached to OKOK International application.
PRODUCT MAINTENANCE AND STORAGE
Scale’s surface should be kept clean. Soiling of sensors may aff ect the measurement accuracy.
The product should be cleaned using a cloth slightly saturated with a water solution of neutral detergent. After the cleaning remove
all detergent residues using a cloth saturated with water and then dry it or leave it for drying.
Do not clean the product using abrasive materials, alcohol, solvents or corrosive agents. Remove batteries from the chamber for
time of cleaning. Reinstall batteries after the product is completely dry.
Do not clean the product by immersing it in water or any other liquid.
Store the product indoors, under conditions specifi ed in “TECHNICAL DATA” section. Place of storage should keep the product
out of reach of children.
If the product is not used for a longer time, remove batteries from the chamber and keep the product in packaging. It is recom-
mended to store the product in packaging supplied with the product.
Transport the product in a manner that is safe for glass surface, it is recommended to transport the product in packaging supplied
with the product.
Summary of Contents for 69201
Page 36: ...36 GR...
