3.5. Deleting device from a pair of controller buttons (DELETE function)
This function deletes from controller's memory the device associated with a pair of buttons on a
selected channel. However, it does not remove the device form the “Z-Wave” network. This function is
accessible from PRIMARY and SECONDARY controllers. The procedure of device deleting from a pair of
controller buttons is presented in
Figure 6
.
*) Programming error can be caused by:
•
failure to press the programming button within 10 seconds from the controller signaling its readiness for
deleting the device from selected pair of buttons;
•
long distance between the controller and device.
11.09.21 NC826
9/16
©2011,
FAKRO
Figure 6: Deleting device from a pair of buttons on the controllers
3. Press “P” button on the device
and hold it for 0.5 sec. (see Device
Programming Manual).
5*
. Programming error – button
flashing for 2-3 sec. as presented in
the drawing.
4
. The controller is signalizing
successful device deleting (buttons
lights up for 2-3 sec. as presented
in the drawing).
2
. The controller is signalising
readiness for device deleting (button
lights up for 10 sec. as presented in
the drawing).
1
. Within 1.5 sec., press:
- “
In/Ex
”(
1
) button twice and then
- the button from this pair of buttons
which operates the device to be
removed (e.g.
2
).
x2
1
2
x1
x1
Summary of Contents for ZWG3
Page 13: ...11 09 21 NC826 13 16 2011 FAKRO ...
Page 14: ...11 09 21 NC826 14 16 2011 FAKRO ...
