Fakir SMART S350, Instruction Manual

Page: 20 / 28

20
NOTICE: If the device is switched off for a
break, with switching on again it starts
automatically with the last set-adjusted
suction force (memory function).
The suction capacity can also be adjusted
with the suction controller [26] on the handle
of the suction hose. Use this controller
(slider) only for short-term reduction of the
suction capacity. For normal suction,
however, you should keep this closed.
Use the Minus field [22] for the permanent
reduction of the suction capacity. Save
energy.
NOTICE: Filter change indication [27]: In
case of full dust bag or filters, as well as
with clogged up accessories (hose, tube,
nozzle), the filter change indication lights
up. In this case, replace the dust bag and/or
the clogged up filters (see Page 14) or
remove the stoppage.
In case of utilization of the turbo mattress
brush or the crevice nozzle, it can be that
the filter change indication lights up before
dust bag or filter are full. This depends on
technical conditions and does not represent
any impairment of function.
Device plug connection [28] in the finger
grip of the handle for the connection of an
optionally available electrical suction brush.