Charging the battery
10
Charging the battery
Information on charging the battery
Fig. 5
ATTENTION!
The battery must be charged for 15 hours be-
fore using the appliance for the first time.
The battery should be completely discharged
before the initial charging.
Check this by switching on the appliance (see
“Operation” in the table of contents). Leave
the appliance switched on until the motor turn
off.
ATTENTION!
The battery will be charged only if the vacuum
cleaner is switched off.
NOTICE!
New batteries or batteries that have not been
discharged for an extended period possibly
will not be fully charged. The battery will be
fully charged after several charging and dis-
charging cycles.
1. Place the vacuum cleaner in the charging
station.
2. Plug the charging station vehicle plug into
the socket or vehicle socket.
3. Check whether the 3-blue LED charging
display on the appliance
(5)
lights up. If so,
the battery is charging.
first LED flashes: 0-40 % charge
second LED flashes: 40-70 % charge (first lights up)
third LED flashes: 70-99 % charge (two LED light up)
The battery is fully charged when all LEDs light up.
4. While charging, the appliance and the
charger become somewhat warm. This is
normal and is not an indication of a problem.
5. After the battery is charged the LED turn off
after a few minutes.
5
