Assembly
10
en
If the fan blade is blocked, switch off the cooling fan immediately and
disconnect it from the power supply. Eliminate the blockage before ope-
rating the cooling fan again.
ATTENTION!
The height of the cooling fan can be adjusted from
approximately 100 –130 cm. For adjustment, loosen the
knurled screw
[11],
pull out or push in the telescopic tube
[3]
to the desired height and secure again using the
knurled screw.
The cooling fan can be set to the desired vertical oper -
ating range by hand: from approximately 15° to the
front (downwards) up to approximately 25° to the back
(upwards).
To do so, hold the cooling fan by the tube and
– from the
back only –
carefully move the motor head forwards or
backwards until the desired position has been reached.
Height adjustment
Vertical adjustment
