Maintenance and cleaning
Replacement of the
motor protection filter
HEPA filter (H14) is located under the air outlet grid.
Remove the air outlet grid by pressing the locking
button.
Remove the HEPA filter and replace it with a new one.
Insert the air outlet grid again and close it until it is
audibly snapped in.
HEPA
* =
H
IGH
E
FFICIENCY
P
ARTICULATE
A
IR
Replacement of HEPA
filter (H14)
NOTE!
Replacement period: Approx. after 6 months.
42
If a larger motor protection filter is available
in the dust bag package, please cut this off
so that it shall be suitable for the appliance.
Ensure that the motor protection filter always
cover the vacuum motor completely and that
no dust can reach the motor.
ATTENTION!
•
Open the dust compartment lid and remove the dust
bag (see replacing the dust bag)
•
Pull out the motor protection filter holder upwards.
•
Remove the motor protection filter and insert a new
filter.
•
Slide the motor protection filter back to its position.
• Insert the dust bag again and close the dust com
partment lid (see replacing the dust bag)
