12
Assembly / Operation
Suction hose
● Insert suction hose over the hook [F] on the handle
assembly.
Power cord
● Wrap the power cord around the lower [H] and upper
[G] holders.
On Model 1107, the upper power cord holder [G] can
be tilted.
Power-on/off
Switch position I
=
ON
Switch position 0
=
OFF
Tilting the guiding tube
Press the pedal to tilt the guiding tube. The brush motor
will not start until the On/Off switch is set to position I.
F
G
H
The brush motor shuts off when the guiding tube is in
vertical position and when the suction tube is removed.
When re-inserting the suction tube, it must lock firmly in-
to place, since otherwise the brush motor will remain
shut off.
NOTICE!
ATTENTION!
Before using the appliance, make sure that all filters and the dust bag
are inserted and intact. Opening the device and checking of the filters
see also chapter “After use”.
Summary of Contents for Nilco Combi 17-30
Page 10: ...10 Combi 17 36 Combi 17 46 Premium 1107 Combi 17 30 Überblick ...
Page 46: ...22 Notes ...
Page 47: ...23 Notes ...
